{
  "id": "mio-make-v01-camera-free-20260929",
  "product": "Mio Make",
  "visibleRevision": "v0.1",
  "engineeringRevision": "September 29 manufacturing prototype, 2026",
  "module": "ESP32-S3-WROOM-1U-N16R8",
  "flashMB": 16,
  "psramMB": 8,
  "logicVoltage": 3.3,
  "onboardExpander": false,
  "physicalValidation": "Prototype display, USB identity, automatic running-firmware updates and both buttons observed; input feel, blank-device first install and full power qualification remain under validation",
  "source": {
    "pcb": "hardware/mainboard/v0.5.0-vision-d01/evidence/camera_free_gpio_edge_2026-09-29/edge_final/mio_make_mainboard_v0_5_0_vision_d01.kicad_pcb",
    "pcbSha256": "93a713a193c1a656f96f0e72092ed5a4583f44223c00816c4d8fdf9ff695945a",
    "netlist": "references/hardware/netlist.xml",
    "publicNetlist": "references/hardware/netlist-public.xml",
    "publicNetlistSha256": "efd74011f9e9f605f00289237389a6e2bb18f47619b4b91095160eb492aa1300",
    "pinout": "references/hardware/FIRMWARE_AND_PINOUT.md",
    "netlistSha256": "7c4aceedf7aa553251787ea435b2185084f17b23c5d968a2285990ad9dd90dc8",
    "schematicSha256": "64722b637fd632ddbd8e312e9911e29220316c11415c5924064789ba85a6f9f1"
  },
  "display": {
    "controller": "ST7789",
    "panel": "GoldenMorning T190X7-C30-01-TAA",
    "width": 320,
    "height": 170,
    "bus": "4-wire SPI",
    "clockHz": 20000000,
    "rotation": 3,
    "sclk": 47,
    "mosi": 48,
    "miso": -1,
    "cs": 9,
    "dc": 45,
    "reset": 46,
    "power": 15,
    "backlight": 7,
    "backlightDriver": "AW9364, pulse-counted, not PWM"
  },
  "buttons": {
    "a": 5,
    "b": 12,
    "activeLow": true,
    "boot": 0,
    "reset": "EN",
    "pullupOhms": 4700,
    "capacitorNanofarads": 47,
    "networkReferences": {
      "a": [
        "R1",
        "C1"
      ],
      "b": [
        "R49",
        "C22"
      ]
    },
    "runtimeContract": "Shared runtime owns independent sampling, debounce and retained press events; apps must not add debounce or raw GPIO access. See docs/INPUT.md."
  },
  "power": {
    "batteryAdc": 4,
    "batteryDivider": 2,
    "regulatorMode": 17,
    "usbCurrentSelect": 6,
    "usbSuspend": 10,
    "usbPgood": 8,
    "usbVoltageValid": 13,
    "accessoryBudgetMa": 100
  },
  "i2c": {
    "sda": 16,
    "scl": 18,
    "defaultHz": 100000,
    "connectors": [
      "J5",
      "J6"
    ],
    "pinOrder": [
      "GND",
      "3V3",
      "SDA",
      "SCL"
    ]
  },
  "nativeGpio": [
    1,
    2,
    3,
    11,
    14,
    21,
    38,
    39,
    40,
    41,
    42
  ],
  "reservedPsram": [
    35,
    36,
    37
  ],
  "strappingPins": [
    0,
    3,
    45,
    46
  ],
  "usb": {
    "dn": 19,
    "dp": 20,
    "vid": 12346,
    "pid": 4097
  },
  "uart": {
    "tx": 43,
    "rx": 44
  },
  "connectors": {
    "J7": {
      "style": "Bare 1x08 right edge row",
      "pads": [
        14,
        21,
        38,
        39,
        40,
        41,
        42,
        "GND"
      ],
      "topToBottomFromLcdFace": [
        "GND",
        42,
        41,
        40,
        39,
        38,
        21,
        14
      ]
    },
    "J8": {
      "style": "Bare 1x08 top row",
      "pads": [
        "GND",
        "3V3",
        1,
        2,
        3,
        11,
        16,
        18
      ]
    }
  }
}
